Available Options
Features
- Draws simultaneous AC power while welding
- The convenience of one-man or two-man opeation
- Delivers up to 400 amps as a welder, 14kW of AC power
- Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes froms sticking during short arc length welding
- Smooth arc characteristics and more consistent, quality welds
- Super clean voltage regulation 1.5% (+/-)
- Tier 4 final Kubota diesel engine D902
- E-mode improves fuel efficiency b allowing oprator to weld at idle up to 240 amps
- Noise level produces only 70 dBA
- Full panel GFCI protection - OSHA and NEC compliant
- Smart stick sensor to automatically shut off the engine during periods of no load and restart when operator strikes the welding rod
Specifications
Unit Specifications | ||
DC Voltage | CC: Single 34V, Dual 27V V | CV: Single 35V, Dual 28V V |
DC Current | CC: Single 400, Dual 200 A | CV: Single 400, Dual 200 A |
Current Range | Single 30-400, Dual 30-200 A | |
Max Duty Cycle | 100% @Single 350, Dual 175 A | |
Welding Processes | SMAW/ FCAW/ GMAW/ GTAW/ ACAC | |
Fuel Tank Capacity | 11.1 gal | 42 L |
Fuel Consumption | 1.3 gph | |
Generator Specifications | ||
AC Power Output | 14 kW | |
Cycle | 60 Hz | |
Voltage | 120/240 V | |
Amperage | 116/58 A | |
Voltage Regulation | 1.5 % | |
Receptacles | NEMA 5-20R 125V GFCI 20A | |
Dimensions & Weights | ||
Overall Length | 61 in | |
Overall Width | 29 in | |
Overall Height | 35 in | |
Shipping Dimensions | 63 x 30 x 41 in | |
Operating Weight | 1144 lb | |
Shipping Weight | 1027 lb |
SINGLE CYLINDER REPAIR
If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112
General | |
Power source | Gas |
Application | Commercial |
Inventory | |
Condition | New |