Wacker PSG2 Submersible Pump 5000620412
$402.00
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
- Pumps feature a top discharge for efficient motor cooling and continuous operation, even when pumping at low water levels.
- Miniature thermal motor protector prevents overheating and dry run conditions.
- Multi-directional discharge coupling for vertical and horizontal hose run without kinking.
- PSG2 500 is ideally suited for low pump applications with minimal solids present. It can pump a reasonable flow sitting on the surface.
- PSR1 500 is ideal for dewatering of flat concrete, like basement and factory floors. For use where a sump pump cannot be installed and water must be almost completely removed.
Specifications
PSG2 500 | |
Dimensions | |
L x W x H in | 8.27 x 8.27 x 11.22 |
L x W x H Shipping in | 14.96 x 9.72 x 9.72 |
Diameter Discharge in | 2 |
Operating weight lb | 23 |
Shipping weight lb | 29 |
Cable length ft | 39.5 |
Cable Size AWG | 16 |
Operating height Min. Running Water Level in | 0.2 |
Operating data | |
Total head ft | 39.5 |
Discharge capacity US gpm | 62.4 |
Solids diameter in | 0.236 |
Engine / Motor type | 60 Hz Single ~ |
Impeller Type | Semi-Vortex Urethane Rubber |
Operating voltage V | 110 |
Current Full Load with 110V A | 6.1 |
Current Start with 110V A | 12.5 |
at rpm rpm | 3,255 |
SINGLE CYLINDER REPAIR
If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112
| General | |
| Power source | Electric |
| Application | Commercial |
| Inventory | |
| Condition | New |
| Location | El Cerrito, CA |
