-16 %
Chicago Pneumatic CP 0010 Pump-Sump 3 hp Motor (T022224)
$2,195.00
$2,612.00
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
- Please note: This item is not available until the end of Feb-2024 New part number 8900004031
- Our sump pumps are of the centrifugal type, pumping fluid by means of an air driven impeller. The pump should be immersed in the liquid to be pumped. The liquid will leave the pump through the outlet port. These pumps are designed for high performance and durability.
- Both models will pump down to within only (22 mm) from the base. They require no priming and can be run continuously, or even run dry, without overheating. They can be totally submerged, using a non-return valve on the exhaust pipe or an extended pipe ending above the level of the liquid.
- The pumps can be used in places where abuse and rough use are inevitable or acceptable in terms of increase in productivity. They are relatively small in size with a very large capacity and thus can be used in confined spaces.
Specifications
PNEUMATIC SUMP PUMP | CP 0010 | |
Weight | kg | 19.5 |
Overall Height | mm | 425 |
Air Consumption | l/s | 47 |
Air Inlet |
| 3/4" NPT |
Motor | kW (hp) | 2.2 (3) |
Minimum Water Depth | mm | 22 |
Discharge Outlet |
| 2" NPT |
Minimum Opening | mm | 210 x 230 |
Maximum Head | m | 30.5 |
Recommended Air Supply Hose Size | mm | 19 |
Part Number |
| T022224 |
General | |
Power source | Air |
Application | Commercial |
Inventory | |
Condition | New |