Menu
Your Cart

Wacker PS2 1503 Submersible Pump 440V/60HZ 2HP 5000009121

Wacker PS2 1503 Submersible Pump 440V/60HZ 2HP 5000009121
-5 % Has Been Discontinued/Obsolete
Wacker PS2 1503 Submersible Pump 440V/60HZ 2HP 5000009121
  • Availability: Has Been Discontinued/Obsolete
  • Model: PS2
  • SKU: 5000009121
Product Views: 3987
$1,798.89
$1,898.95
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Portable, three phase submersible pumps are designed to handle water and solids. Built for the demands of construction, mining, municipality and farm applications.

 

bulletCompact slim line design in a rugged cast iron case.
bulletTop discharge, flow-through design enables operation at low water levels for extended periods.
bulletDurable high chrome impeller with ductile iron wear plate reduces wear when pumping abrasive materials.
bulletHeavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs.
bulletInsulation on all conductors of the power cable are protected by a water block system to prevent wicking of water into the motor.
bulletSilicon carbide double mechanical seals run in an oil-filled cavity allowing for seal lubrication, cooling and overall motor protection.
bulletAdditional lip seal protects mechanical seal from abrasive wear due to suspended debris in pumping fluid.
bulletHigh efficiency, continuous duty motor with built-in thermal and over current motor protection increases motor life.

Standard Package – PS2 1503 
Above package includes electrical supply cable, operator's manual and parts book.

Technical Data

DescriptionMetricImperial
Discharge diameter50mm2in
Length x width x height235 x 215 x 480mm9.3 x 8.5 x 18.8in
Operating weight29kg64lb
Shipping weight (including packaging)34kg75lb
Shipping size (LxWxH)280 x 265 x 585mm11 x 10.5 x 23in
Max. head23m75ft
Max. discharge400l/min106US gpm
Max. pressure2,28bar33psi
Solid size capacity8,5mm.3in
Motor typeThree Phase / 60 Hz
Voltage440V440V
Current (full load/start @ 440V)3,1/21,0A3.1/21A
Speed3.4001/min3,400rpm
Max. power output according to DIN-ISO 3046*1,5kW2hp
Cable length15m50ft
Cable size1,31mm216AWG
General
Power sourceElectric
ApplicationCommercial
Inventory
ConditionNew

Write a review

Please login or register to review