General Equipment Company EP8 Axial Blower, .33HP, 115VAC, 8D

California Proposition 65 Warning

WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Designed to accommodate most non hazardous confined space ventilation requirements. Built with heavy-gauge aluminum and steel construction. Applicable models certified by Canadian Standards Association (CSA). All units offer independent laboratory certified air flow rates. Less air duct unless included as a standard component.

Power Source: .33 HP, 115 VAC, 60 HZmotor
Fan Type: Radial
Duct Diameter: 8.0 inches
Free Air Flow: 1277.4 CFM

Specifications

POWER SOURCE

Type: .33 HP (.25 Kw), 60 HZ, 115 VAC, single phase, electric motor
RPM: 1725.0
Speed Control: Single Speed

BLOWER

Type: Radial
Material: Cast aluminum
Wheel Type: Steel, multi-vane
Size: 8.0 inch (203.2 mm) Nominal Diam. inlet/Outlet

GENERAL

Mounting: Rubber
Type: Anti-Vibration
Weight: 57.6 lbs (26.1 kg)

DIMENSIONS

Height: 19.9 inches (504.5 mm)Length: 18.0 inches (457.2 mm)Width: 14.5 inches (368.3 mm)

FLOW RATES

Free Air: 1277.4 CFM (36.2 CMM)
One 90 Degree Bend: 738.0 CFM (20.9 CMM)
Two 90 Degree Bends: 578.8 CFM (16.4 CMM)

Part Number: 10564

SINGLE CYLINDER REPAIR

If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112

General
Power source	Electric
Application	Commercial
Inventory
Condition	New

Same Brand
Same Category

General Equipment 102-1000 Standard moil point, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$55.39

General Equipment 102-1100 Standard narrow chisel, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$55.39

General Equipment 102-1200 Standard 3 inch chisel, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$80.33

General Equipment 102-1400 Chisel, 5inch

1-1/8 inch hex x 6 inch shank, 5 inch asphalt spade accessory tool. Used for removing thinset-type materials from concrete surfaces. Forged from a..

$189.00

General Equipment 102-1500A Chisel, 5inch

1-1/8 inch hex x 6 inch shank, scraper blade accessory tool. Used with scraper blades to remove material buildups and thinset-type materials from co..

$193.00

General Equipment 130C Clamp Mount Cut-R-Tach, 13.5 inches

Bucket Mount, 13.5 inch diameter blade, 5.0 inch maximum cutting depth. Twin Oilite®-type, sleeve bearings, 25,000 lbs maximum down force capacity. No..

$2,095.25

General Equipment 130C-0020A Steel Blade for 130 CUT-R-TACH

Description: Replacement Cutting Blade. Complete with Oilite®-Type, Sleeve Bearings and Hub.Product Application: 130 Series CUT-R-T..

$866.00

General Equipment 190C Clamp Mount Cut-R-Tach, 19 inches

190C Clamp Mount CUT-R-TACH® Rotary Asphalt Cutting AttachmentBucket Mount, 19.0 inch diameter blade, 5.5 inch maximum cutting depth. Twin Timken®-typ..

$2,755.00

General Equipment 190C-0010 Steel Blade for 130 CUT-R-TACH

Description: Replacement Cutting Blade. Complete with Oilite®-Type, Sleeve Bearings and Hub.Product Application: 190 Series General..

$925.85

General Equipment 190M Moldboard Mount Cut-R-Tach, 19 inches

190C Clamp Mount CUT-R-TACH® Rotary Asphalt Cutting AttachmentBucket Mount, 19.0 inch diameter blade, 5.5 inch maximum cutting depth. Twin Timken®-typ..

$3,485.05

General Equipment 190MB Mounting Block, used with 190S

Scarifier Mount (1” x 3” shank), 19 inch diameter blade, 5-1/2 inches maximum cutting depth. Twin Timken®-type, tapered roller bearings, 50,000 lbs ma..

$687.00

General Equipment 190S Scarifier Mount Cut-R-Tach, 19 inches

Scarifier Mount (1” x 3” shank), 19 inch diameter blade, 5-1/2 inches maximum cutting depth. Twin Timken®-type, tapered roller bearings, 50,000 lbs ma..

$2,050.00

General Equipment 2350-10E 10 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-10E Flighting OD 10 inch ..

$320.00

General Equipment 2350-12E 12 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-12E Flighting OD 12 inch ..

$396.00

General Equipment 2350-2E 2-1/4 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-2E Flighting OD 2-1/4 inc..

$185.00

General Equipment 2350-3E 3-1/4 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-3E Flighting OD 3-1/4 inc..

$190.00

General Equipment 4400-14E3 14" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$560.00

General Equipment 4400-16E3 16" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$895.00

General Equipment 4400-18P 18" Earth Auger

Specifications Part No. 4400-18P Flighting OD..

$835.00

General Equipment 4400-2E3 2-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$362.85

General Equipment 4400-3E3 3-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$358.85

General Equipment 4400-4E3 4-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$364.00

General Equipment 4450-12E3 12" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$480.00

General Equipment 4450-6E3 6 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® ..

$400.00

General Equipment 4450-8E3 8" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$415.00

B-Air PB-25 Axial Air Mover, 2.6A/ 1/4 HP/ 2 Speed

B-Air PB-25 Axial Air Mover, 2.6A/ 1/4 HP/ 2 Speed

Sold Out

Features Built-in, adjustable feet allows unit to be at level, horizontal angle, or at a downward 18° angle with a concentrated air flow ..

$270.00

B-Air VP-25 1/4 HP Compact Air Mover 900 CFM

B-Air VP-25 1/4 HP Compact Air Mover 900 CFM

Call/Text 510-761-1112 for info

Features 3-SPEED AIR MOVERIncludes daisy-chain capabilities; connect up to 5 units together while using only one outlet Perfect for ..

$0.00

B-Air VP-33 1/3 HP Air Mover 2530 CFM

Call/Text 510-761-1112 for info

Features 2-SPEED AIR MOVERSIncludes daisy-chain capabilities; connect up to 4 units together while using only one outlet 3 ..

$186.00

B-Air VP-50 1/2 HP Air Mover 2530 CFM

Call/Text 510-761-1112 for info

Features 2-SPEED AIR MOVERSIncludes daisy-chain capabilities; connect up to 4 units together while using only one outlet 3 differ..

$259.00

B-Air VPX34 1/3 HP Air Mover 2530 CFM

Features 2-SPEED AIR MOVERSIncludes daisy-chain capabilities; connect up to 4 units together while using only one outlet 3 differ..

$242.00

Dri-Eaz 100250 Air Filter for F203 & F412 3/PK F581

FeaturesExpanded cellulose mesh captures large particles. Electrostatically charged polypropylene attracts and retains smaller particles. A..

$48.62

Dri-Eaz 111192 Hepa Filter for F284 Sold Each F321

Primary HEPA filter with efficiency rating of 99.97% against 0.3 micron oily aerosol particles, combining filtration efficiency and large capacity. To..

$201.88

Dri-Eaz 113164 Airmover Stealth AV3000

FeaturesIntegrated stand provides ultimate control - direct airflow at walls, floors or ceilings Low-noise Stealth™ fan blades for quieter op..

$569.00

Dri-Eaz 114969 Airmover Velo Pro F505

FeaturesAdjust amp draw from 1.2-1.9 amps in 0.1-amp increments to balance draw in limited power settings Variable speed control from 500 (mi..

$489.95

Dri-Eaz 124315-1 Turbo Dryer Sahara Pro X4

FeaturesVersatile 3-speed, 3-position operation. Daisy-chain capability with convenience outlet and circuit breaker. Stacks securely for st..

$252.00

Dri-Eaz 125470 Airmover Velo Low Profile F504

FeaturesEngineered airflow. Patented outlet design ensures even, broad-path airflow for fast, consistent drying across all surfaces. Multiple..

$432.00

Dri-Eaz F451 Airmover Dri Pod

Call/Text 510-761-1112 for info

FeaturesDries carpets and hard surface floors quickly after cleaning, leaks or spills. Onboard convenience outlet—daisy-chain up to 6 u..

$0.00

Dri-Eaz F504-D Airmover Velo

Call/Text 510-761-1112 for info

Features and BenefitsEngineered airflow. Patent pending outlet design Multiple operating positions Low profile and stackable Easiest to m..

$0.00

Dri-Eaz F590 Air Filter Revolution 3/PK

FeaturesExpanded cellulose mesh captures large particles. Electrostatically charged polypropylene attracts and retains smaller particles. A..

$59.00

General Equipment Company EP12ACP Blower, 1.0Hp, 115Vac, 12D

Designed with flexibility in mind, every feature of the EP12ACP VelociMax™ Ventilation Blower is designed to meet the confined spaceventilation demand..

$439.00

General Equipment Company EP16ACP Blower, 1.0Hp, 115Vac, 16D

Designed with flexibility in mind, every feature of the EP16ACP VelociMax™ Ventilation Blower is designed to meet the confined spaceventilation demand..

$499.00

General Equipment Company EP20ACP Blower, .43 HP, 115Vac

Use the EP20ACP DownForce™ Ventilation Blower for both vertical and horizontal air flow movement job applications including carpets,subfloors, cabinet..

$465.00

General Equipment Company EP8AC25P R-Pac 8" Ventilation Blower, .33 HP

Designed with flexibility in mind, every feature of the EP8AC25P VelociMax™ BLOW-R-PAC™,Ventilation Blower complete with 8.0 inchdiameter x 25.0 foot ..

$506.00

General Equipment Company EP8ACP Axial Blower, .33HP, 115VAC, 8D

Designed with flexibility in mind, every feature of the EP8ACP VelociMax™ Ventilation Blower is designed to meet the confined spaceventilation demands..

$365.00

General Equipment Company GP8 Blower, Gas, 3.5 HP Briggs & Stratton engine

3.5 HP Briggs & Stratton gasoline engine. 8.0 inch inlet and outlet diameter. Cast aluminum fan and blower housing construction; spring mounted on..

$1,115.00

General Equipment Company GP8H Blower, Gas, 3.5 Hp, Honda engine

Designed to accommodate most non hazardousconfined space ventilation requirements.Built with heavy-gauge aluminum and steelconstruction. Applicable mo..

$1,365.00

Master Heater MAC-30-DDF 30" Direct-Drive Fan On Cart

Call/Text 510-761-1112 for info

The MAC-30-DDF utilizes our efficient direct drive design, which helps to conserve electricity. It has 3 speed settings, and features a heavy-duty all..

$0.00

Master Heater 731231 Tent Fan Versa-Kool with Pole Mount

Pre-Order

Features and BenefitsDeep guard design provides unmatched performance at very low noise levels Looks great! White fans blend in with tents ..

$303.33

Master Heater MAC-20F-DDF 20" Floor/Wall Fan

Call/Text 510-761-1112 for info

The MAC-20F-DDF utilizes our efficient direct drive design, which helps to conserve electricity. It has 3 speed settings, and features a heavy-duty al..

$0.00