Specialty Equipment

FeaturesThe rugged, heavy duty design will hold up to the challenges of the job Two handed control provides operational safety Cushion mounted log cradle is designed to snap out of the way when using the splitter in the vertical position Spring loaded wedge cleaner Torsion axle suspen..

FeaturesThe rugged, heavy duty design will hold up to the challenges of the job Two handed control provides operational safety Cushion mounted log cradle is designed to snap out of the way when using the splitter in the vertical position Spring loaded wedge cleaner Torsion axle suspen..

Pressure Feed Tank Assembly an accessory design specifically for the diaphragm series hydrostatic test pumps allowing the user to pressure feed the unit, along with adding chemicals or other fluids to test environment. Heavy duty construction and all installation parts are included.Simple and "F..

Pressure Feed Tank Assembly an accessory design specifically for the diaphragm series hydrostatic test pumps allowing the user to pressure feed the unit, along with adding chemicals or other fluids to test environment. Heavy duty construction and all installation parts are included.Simple and "F..

Hydrostatic Test Pump. The DPV-3B is a large volume medium pressure hydrostatic test pump. Designed to allow handling of up to a 10% chlorine solution, recommended for testing water lines up to 24" in diameter. Options available include a wheel and handle kit for portability, and a 20 gallon pressur..

Hydrostatic Test Pump. The DPH-3B is a large volume medium pressure hydrostatic test pump. Designed to allow handling of up to a 10% chlorine solution, recommended for testing water lines up to 24" in diameter. Options available include a wheel and handle kit for portability, and a 20 gallon pressur..

Hydrostatic Test Pump. The DPH-56/250 is an extremely large volume low pressure hydrostatic test pump. Designed to allow handling of up to a 10% chlorine solution, recommended for testing water lines up to 96" in diameter and above.56 GPM up to 250 PSI 389 CC 13 HP, air-cooled, 4 cycle ..

Kit Include: DPH-8, RI-10 & 8B-PRESSUREDHydrostatic Test Pump. The DPH-8 is a large volume low pressure hydrostatic test pump. Designed to allow handling of up to a 10% chlorine solution, recommended for testing water lines up to 96" in diameter. Options available include a wheel and handle ..

Hydrostatic Test Pump. The EL1A is a low volume medium pressure hydrostatic test pump designed for testing sprinkler systems, irrigation lines, pressure vessels, plant process piping, and small diameter water lines.3 GPM up to 500 PSI 1 HP Electric Motor, TEFC, 110/220 Volt, 50/60 HZ ..

Hydrostatic Test Pump. The EL2 is a low volume high pressure hydrostatic test pump designed for testing sprinkler systems, irrigation lines, pressure vessels, plant process piping, and small diameter water lines.1.5 GPM up to 1000 PSI 1 HP Electric Motor, TEFC, 110/220 Volt, 50/60 HZ ..

Hydrostatic Test Pump. The EL3 is a low volume high pressure hydrostatic test pump designed for testing sprinkler systems, irrigation lines, pressure vessels, plant process piping, and small diameter water lines.1.5 GPM up to 1500 PSI 1.5 HP Electric Motor, TEFC, 110/220 Volt, 50/60 HZ ..

The HP-1/55 model is a pneumatic driven hydrostatic test pump with a pressure range of 550 to 5500 PSI, with a flow rate of 1 GPM. Lightweight at 50 pounds and portable this unit is ideal for testing in small confined spaces and remote locations. Designed for testing oil, gas, water and steam lines;..

The HP-10 model is a pneumatic driven hydrostatic test pump with a pressure range of 1000 to 10,000 PSI. Lightweight, under 45 pounds and portable this unit is ideal for testing in small confined spaces and remote locations. Designed for testing oil, gas, water and steam lines; such as onboard ships..

The HP10-V model is a pneumatic driven hydrostatic test pump with a pressure range of 1000 to 10,000 PSI.  Designed for testing oil, gas, water and steam lines; such as onboard ships, oil rigs and refineries.  Rugged steel frame with wheels for portability, and dual pressure gauges for com..

The HP-20 model is a pneumatic driven hydrostatic test pump with a pressure range of 2000 to 20,000 PSI. Lightweight, at 65 pounds and portable this unit is ideal for testing in small confined spaces and remote locations. Designed for testing oil, gas, water and steam lines; such as onboard ships, o..

The HP-25/35 model is a pneumatic driven hydrostatic test pump with a pressure range of 350 to 3500 PSI, with a flow rate of 2.5 GPM. Lightweight at 50 pounds and portable this unit is ideal for testing in small confined spaces and remote locations. Designed for testing oil, gas, water and steam lin..

The HP-30 model is a pneumatic driven hydrostatic test pump with a pressure range of 3000 to 30,000 PSI. Lightweight, at 70 pounds and portable this unit is ideal for testing in small confined spaces and remote locations. Designed for testing oil, gas, water and steam lines; such as onboard ships, o..

The HP-35/20 model is a pneumatic driven hydrostatic test pump with a pressure range of 200 to 2000 PSI, with a flow rate of 3.5 GPM. Lightweight at 50 pounds and portable this unit is ideal for testing in small confined spaces and remote locations. Designed for testing oil, gas, water and steam lin..

The HP-6/500 model is a pneumatic driven hydrostatic test pump with a pressure range of 50 to 500 PSI, with a flow rate of 6 GPM. Lightweight at under 50 pounds and portable this unit is ideal for testing in small confined spaces and remote locations. Designed for testing oil, gas, water and steam l..

The HP10-B model is a pneumatic driven hydrostatic test pump with a pressure range of 1000 to 10,000 PSI. Designed for testing oil, gas, water and steam lines; such as onboard ships, oil rigs and refineries. Rugged steel enclosure with wheels for portability, and dual pressure gauges for comparison ..

The MTP-1 a manually operated Hydrostatic Test Pump, with a pressure range up to 1000 PSI. Designed for testing small diameter water lines in landscaping, plumbing and residential type applications. A unique dual checkvalve system eliminates waste bleed-back during test, greatly reducing user fatigu..

The MTP-15 a manually operated Hydrostatic Test Pump, with a pressure range up to 1500 PSI. Designed for testing small diameter water lines in landscaping, plumbing and residential type applications. A unique dual checkvalve system eliminates waste bleed-back during test, greatly reducing user fatig..

The MTP-5 a manually operated Hydrostatic Test Pump, with a pressure range up to 500 PSI. Designed for testing small diameter water lines in landscaping, plumbing and residential type applications. A unique dual checkvalve system eliminates waste bleed-back during test, greatly reducing user fatigue..

FeaturesMeets AWWA Standards C651-14, C600-17, C655-18. Test pump can withstand up to a 10-percent chlorine solution. Diaphragm pump able to run dry without damage. Reference chart for proper ratio between GPM and PPM. QR code for operating instructions and how to videos. PCH manifo..

FeaturesMeets AWWA Standards C651-14, C600-17, C655-18. Test pump can withstand up to a 10-percent chlorine solution. Diaphragm pump able to run dry without damage. Reference chart for proper ratio between GPM and PPM. QR code for operating instructions and how to videos. PCH manifo..

Portable "Back Saver" - the wheel and handle kit instantly makes your test pump truly portable and easy to maneuver, saving you time, labor, maintenance, and repair. The new "NO FLAT" tires are made of polyurethane foam with open and closed air cells, creating a tire 2 times stronger than rubber, ye..