Simonds 19100250 Brush Chipper Knife, 10&quot; x 5-1/2&quot; x 5/8&quot; for Bandit

California Proposition 65 Warning

WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

A8 modified knife steel
Heat treated to be very hard
Provide best abrasion resistance, cutting edge retention and impact resistance
Made in the USA
Used on:
Bandit: 1290H, 1590, 1890 and 2090 (uses 5/8"" hardware)

Specifications

Length: 10"
Width: 5-1/2"
Thickness: 5/8"
Number of holes: 5
Bevel angle: 30 Degrees
Weight: 7.35 lbs

SINGLE CYLINDER REPAIR

If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112

General
Application	Commercial
Inventory
Condition	New

Same Brand
Same Category

Simonds 19050850 5.075 x 4 x 0.375 Chipper Knife for Bandit 90 and Crary Bear Cat

Features and BenefitsLength: 5-3/32″ Width: 4″ Thickness: 3/8″ Number of Holes: 2 Bevel Angle: 30 Degrees Weight: 1.72 lbsUse o..

$59.75

Simonds 19050900 Brush Chipper Knives, 5-1/8" x 4-1/2" x 1/2" For Bandit, JP Carlton 2018D and Salsco 810 & 813

Features and BenefitsLength: 6.5" Width: 2.265" Thickness: .375" Number of holes: 4 Bevel angle: 40 Degrees Weight: 4 lbs Used on: ..

$44.98

Simonds 19052000 Brush Chipper Knife, 5-3/32" x 4" x 1/2" for Bandit 90XP

A8 modified knife steel Heat treated to be very hard Provide best abrasion resistance, cutting edge retention and impact resistance Made in ..

$62.00

Simonds 19071640 Brush Chipper Knife, 7-1/4" x 4" x 3/8" For Altec, Asplundh, Bandit, Morbark and Woodchuck

A8 modified knife steel Heat treated to be very hard Provide best abrasion resistance, cutting edge retention and impact resistance Made in ..

$42.25

Simonds 19071660 Brush Chipper Knife, 7-1/4" x 4" x 1/2" For Bandit

A8 modified knife steel Heat treated to be very hard Provide best abrasion resistance, cutting edge retention and impact resistance Made in ..

$49.88

Simonds 19071700 Brush Chipper Knife 7-1/4" x 4-1/2" x 1/2" for Bandit and JP Carlton

A8 modified knife steel Heat treated to be very hard Provide best abrasion resistance, cutting edge retention and impact resistance Made in ..

$56.89

Simonds 19072000 Brush Chipper Knife 7-7/32″ x 3″ x 1/2″ For Bandit 60 & 65

Pre-Order

FeaturesLength: 7-7/32″ Width: 3″ Thickness: 1/2″ Number of Holes: 3 Bevel Angle: 37 Degrees Weight: 2.20 lbsUse on : ..

$52.99

Simonds 19103250 Brush Chipper Knife, 10-1/2-in. X 5-in. X 1/2-in for Morbark

Pre-Order

FeaturesLength: 10-1/2″ Width: 4″ Thickness: 3/8″ Number of Holes: 4 Bevel Angle: 31 Degrees Weight: 3.48 lbsUse on :Morbar..

$65.00

Simonds 19103260 Brush Chipper Knife 10-1/2" x 5" x 1/2" for Morbark

A8 modified knife steel Heat treated to be very hard Provide best abrasion resistance, cutting edge retention and impact resistance Made in ..

$82.99

Simonds 19110000 Brush Chipper Knife 10-1/8-in. X 3-5/8-in. X 9/16-in for Bandit 95

Pre-Order

FeaturesLength: 10-1/2″ Width: 4″ Thickness: 3/8″ Number of Holes: 4 Bevel Angle: 31 Degrees Weight: 3.48 lbsUse on :..

$85.91

Simonds 25061 16" X 3" X 3/8" Chipper Knife

Pre-Order

Features and BenefitsLength: 16″ Width: 3″ Thickness: 3/8″ Bevel Angle: 40 Degrees Weight: 4.44lbsUse on:Altec: WC 166, Se..

$84.73

Simonds 790006.DOS Brush Chipper Knife, 6.5" x 2.265" x .375" for Dosko 13-21T-13H

Features and BenefitsLength: 6.5" Width: 2.265" Thickness: .375" Number of holes: 4 Bevel angle: 40 Degrees Weight: 4 lbs Used..

$62.64

Simonds 80209 Brush Chipper Knife 12-1/8″ x 5-1/2″ x 5/8″ for Bandit 1990 & 3590

Pre-Order

FeaturesLength: 12″-1/8″ Width: 5″-1/2″ Thickness: 5/8″ Number of Holes: 6 Bevel Angle: X.xx Degrees Weight: 8.76 lbsUse on..

$96.07

Simonds 80736 Brush Chipper Knife 8-15/32″ x 4-1/2″ x 1/2″ For Bandit 255

Pre-Order

FeaturesLength: 8-15/32″ Width: 4-1/2″ Thickness: 1/2″ Number of Holes: 3 Bevel Angle: 31 Degrees Weight: 4.04lbsUse on..

$66.99

Simonds 80870 Brush Chipper Knife, 10-1/2" x 5" x 5/8" for Morbark 14, 15, 18 & 2400

A8 modified knife steel Heat treated to be very hard Provide best abrasion resistance, cutting edge retention and impact resistance Made in ..

$93.28

Simonds International 19110000.SIM 10.075 x 3.625 x 0.563 Chipper Knife

Pre-Order

CEI 19110000.SIM 10.075 x 3.625 x 0.563 Chipper KnifeSINGLE CYLINDER REPAIRIf you have any questions about any products .&n..

$93.91

Simonds International 80209.SIM 12.125 x 5.5 x 0.625 Chipper Knife

Pre-Order

Simonds International 80209.SIM 12.125 x 5.5 x 0.625 Chipper Knife SINGLE CYLINDER REPAIRIf you have any questions abo..

$106.07

B-Air BA-AS-ACF.BAI Carbon Filter for the B-Air RA-650 Air Scrubber - Pack of 3

Features and BenefitsColor: Black Dimensions: 16" W x 16" L x 1.1" H Product Type: FilterSINGLE CYLINDER REPAIRIf you have a..

$109.00

B-Air BA-AS-HF.BAI HEPA Replacement Filterfor the B-Air RA-650 Air Scrubber - Pack of 2

Features and BenefitsColor: White Dimensions: 16.3" W x 18.5" L x 2.4" H Product Type: FilterSINGLE CYLINDER REPAIRIf you ha..

$299.00

B-Air BA-AS-PF.BAI Pleated Media Filter for the B-Air RA-650 Air Scrubber - Pack of 5

Features and BenefitsColor: White Dimensions: 16" W x 16" L x 1" H Product Type: FilterSINGLE CYLINDER REPAIRIf you have any..

$85.00

B-Air BA-PB25.BA Air Mover Stand (Fits PB-25)

Sold Out and Discontinued

POLAR BEAR AIR MOVER STAND (Fits PB-25)The Item BA-PB25.BA superseded to PB-RB.BAI..

$105.00

B-Air PB-25 Axial Air Mover, 2.6A/ 1/4 HP/ 2 Speed

B-Air PB-25 Axial Air Mover, 2.6A/ 1/4 HP/ 2 Speed

Sold Out

Features Built-in, adjustable feet allows unit to be at level, horizontal angle, or at a downward 18° angle with a concentrated air flow ..

$270.00

B-Air PB-RB.BAI Axial Air Mover Stand for (PB-25)

B-Air PB-RB.BAI Axial Air Mover Stand for (PB-25)

Sold Out and Discontinued

Axial Air Mover Stand for (PB-25)The New Air Mover Stand BA-PB25.BA..

$97.00

B-Air VG1500 Vantage Dehumidifiers

Features Small but rugged design Rotomolded polyethylene housing R410a refrigerant Compressor type rotary Electronic touch pad con..

$1,629.00

B-Air VGLR2200 Vantage Dehumidifiers

Features Small but rugged design Rotomolded polyethylene housing R410a refrigerant Compressor type rotary Electronic touch pad ..

$2,539.00

B-Air VLO-25 Ventlo-25 Low Profile Air Mover

Features Includes GFCI daisy-chain capabilities; connect up to 6 units together while using only one outlet Durable, rotomolded, interlo..

$399.00

B-Air VP-25 1/4 HP Compact Air Mover 900 CFM

B-Air VP-25 1/4 HP Compact Air Mover 900 CFM

Call/Text 510-761-1112 for info

Features 3-SPEED AIR MOVERIncludes daisy-chain capabilities; connect up to 5 units together while using only one outlet Perfect for ..

$0.00

B-Air VP-33 1/3 HP Air Mover 2530 CFM

Call/Text 510-761-1112 for info

Features 2-SPEED AIR MOVERSIncludes daisy-chain capabilities; connect up to 4 units together while using only one outlet 3 ..

$186.00

B-Air VP-50 1/2 HP Air Mover 2530 CFM

Call/Text 510-761-1112 for info

Features 2-SPEED AIR MOVERSIncludes daisy-chain capabilities; connect up to 4 units together while using only one outlet 3 differ..

$259.00

B-Air VPX34 1/3 HP Air Mover 2530 CFM

Features 2-SPEED AIR MOVERSIncludes daisy-chain capabilities; connect up to 4 units together while using only one outlet 3 differ..

$242.00

Banjo 12702A.BAN 2" Poly Pump Volute

Banjo Genuine OEM 12702A is the replacement pump volute for Banjo 2" poly pumps...

$60.58

Banjo 205PH-5-160.BAN Water Pump, 2" Polypropylene Transfer, Honda GX160

Features Handles high-capacity liquid transfer jobs Up to 195 GPM flow rate Honda GX160, 163cc engine Polypropylene housing Nylon ..

$629.00

Banjo 205PH-5-160E Water Pump, 2" Polypropylene Transfer, Honda GX160 w/ Elec. Start

Features Handles high-capacity liquid transfer jobs Up to 195 GPM flow rate Honda GX160, 163cc engine with Electric start Polypropyl..

$898.00

Banjo 205PH-5-GC.BAN Water Pump, 2" Polypropylene Transfer, Honda GC160

Sold Out and Discontinued

Features Handles high-capacity liquid transfer jobs Up to 195 GPM flow rate Honda GC160 engine for easy starts Polypropylene housing..

$508.00

Banjo 205PH-6-200.BAN Water Pump, 2" Polypropylene Transfer, Honda GX200

Banjo 205PH-6-200.BAN Water Pump, 2" Polypropylene Transfer, Honda GX200

-12 %

Features 2" Multi-Purpose Pump Honda OHV GX200 Commercial Grade Engine Protected By Honda Oil Alert® Warning System - alerts you or sh..

$684.00 $781.00

Banjo 205PH-6-200E.BAN Water Pump, 2" Polypropylene Transfer, Honda GX200, Elec. Start

Banjo 205PH-6-200E.BAN Water Pump, 2" Polypropylene Transfer, Honda GX200, Elec. Start

-14 %

Features 2" Electric Start Multi-Purpose Pump Honda OHV GX200 Commercial Grade Engine Protected By Honda Oil Alert® Warning System - a..

$968.50 $1,121.00

Banjo 205PO.BAN Pump Only 2" Polyproylene Self Priming

-32 %

FeaturesPolypropylene construction Self-priming Stainless steel shaft sleeve to protect engine shaft High performance impellersSpec..

$229.89 $340.00

Banjo 215PH-5-160.BAN Water Pump, 2" Polypropylene Transfer, 163cc Honda GX160

Banjo 215PH-5-160.BAN Water Pump, 2" Polypropylene Transfer, 163cc Honda GX160

-19 % Pre-Order

Features 2" Multi-Purpose Pump Honda OHV GX200 Commercial Grade Engine Protected By Honda Oil Alert® Warning System - alerts you or sh..

$688.00 $849.00

Banjo 215PO.BAN Pump Only 2" Polyproylene, Viton Seals

Banjo 215PO.BAN Pump Only 2" Polyproylene, Viton Seals

-21 % Pre-Order

FeaturesPolypropylene construction Self-priming Stainless steel shaft sleeve to protect engine shaft High performance impellersSpec..

$373.00 $473.00

Banjo 222PIH6.BAN Water Pump, 2" Cast Iron, 196cc Honda GX200

FeaturesCast iron construction for rugged dependability Self-priming Stainless steel shaft sleeve to protect engine shaft High performanc..

$1,209.00

Banjo 222POI.BAN Pump Only 2" Cast Iron, EPDM Seals

-36 %

FeaturesCast Iron construction Self-priming Stainless steel shaft sleeve to protect engine shaft High performance impellersSpecific..

$598.63 $932.00

Banjo 225PIH6.BAN Water Pump , 2" Cast Iron 196cc w-GX200 w/Trimmed Impeller

-12 % Pre-Order

FeaturesCast iron construction for rugged dependability Self-priming Stainless steel shaft sleeve to protect engine shaft High performanc..

$1,045.00 $1,191.00