Multiquip MRH800GS Walk-Behind Roller
$18,920.20
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Features
- Hydrostatic drive eliminates drive belts and adjustments
- Infinite variable speed control gives the operator full control with forward, reverse speeds
- External mounted vibrator assembly for easy maintenance access
- Deadman safety control stops roller when the operator takes hands off the control levers
- Large rubber shock mounts minimize drum vibration transfer to engine, hydraulic components
- Guide handle folds up 90 degrees for easy transport and storage
- Narrow profile design for less than 1 inch (25 mm) side clearance
- Dual sprinkler controls wet drum individually
- Single access maintenance cover for easy access to all hydraulic components
- Permanently lubricated bearings are maintenance free
- Built-in tie-downs on all four corners secure the roller during transport
Unit Specifications | ||
Compaction Force | 5300 lb | 23.57 kN |
Frequency | 3300 VPM | 55.3 Hz |
Travel Speed | 0-2 mph | 0-3 kph |
Water Tank Capacity | 10.6 gal | 40.12 L |
Drum Specifications | ||
Front Drum Width | 25.6 in | 650 mm |
Rear Drum Width | 25.6 in | 650 mm |
Dimensions & Weights | ||
Overall Length | 105 in | 2667 mm |
Overall Width | 27.2 in | 691 mm |
Overall Height | 41.7 in | 1059 mm |
Operating Weight | 1530 lb | 694 kg
|
SINGLE CYLINDER REPAIR
If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112
| General | |
| Power source | Gas |
| Application | Commercial |
| Inventory | |
| Condition | New |
