-20 %
Honda WH20 (WH20XTAF) High Pressure Pump, GX160
$799.00
$999.00
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Features
- High pressure 2" pump
- Easy starting Honda OHV commercial engine
- 134 gal./min capacity
- 61 psi max.
- Cast iron volute and impeller
Specifications
Engine | GX160 |
Displacement | 163cc |
Bore and stroke | 2.7" x 1.8" |
Compression Ratio | 9.0:1 |
Oil Alert | N/A |
Pump type | High Pressure, Centrifugal, Self-priming |
Volute | Rigid Mounted Cast Iron |
Impeller | Cast Iron |
Mechanical Seal (Pump case / impeller) | Carbon/Ceramic |
Priming time | 80 sec. at 16.4 ft. |
Drive system | Direct |
Discharge capacity | 134 gals./min. |
Suction port diameter | 2" NPT |
Discharge port diameter | 2" NPT |
Total head lift | 141 ft. |
Suction head lift | 26 ft. |
Maximum pressure | 61 psi |
Solids handling | N/A |
Dimensions (LxWxH) | 16.7" x 14.8" x 15.9" |
Dry weight | 52 lb. |
Fuel Capacity | 0.82 gal |
Run Time @ Max Discharge | 1.5 hr |
Strainer Part # | 78325-YB7-702 |
Residential Warranty | 3 years |
Commercial Warranty | 3 years |
| General | |
| Power source | Gas |
| Application | Commercial |
| Inventory | |
| Condition | New |
| Location | El Cerrito, CA |
-250x250.jpg "Buy Single Cylinder Repair Genuine OEM Muffler for Honda GX160 Muffler (Complete) Fits All GX160 Models")
-250x250.jpg "Front Wheel non OEM 44700-VK6-020ZA for Honda HRC216K1, HRC216k2, HRC216K3 (Set of 2)")
