Honda WH15 (WH15XTA) High Pressure Pump, GX120, 1.5"
$699.00
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Features
- High pressure 1.5" centrifugal pump
- Easy starting Honda OHV commercial engine
- 115 gal./min. capacity
- 55 psi max.
- Cast iron volute and impeller
Specifications
Engine | GX120 |
Displacement | 118cc |
Bore and stroke | 2.4" x 1.7" |
Compression Ratio | 8.5:1 |
Oil Alert | N/A |
Pump type | High Pressure, Centrifugal, Self-priming |
Volute | Rigid Mounted Cast Iron |
Impeller | Cast Iron |
Mechanical Seal (Pump case / impeller) | Carbon/Ceramic |
Priming time | 80 sec. at 16.4 ft. |
Drive system | Direct |
Discharge capacity | 115 gals./min. |
Suction port diameter | 1.5" NPT |
Discharge port diameter | 1.5" NPT |
Total head lift | 127 ft. |
Suction head lift | 26 ft. |
Maximum pressure | 55 psi |
Solids handling | N/A |
Dimensions (LxWxH) | 16.3" x 14.2" x 15.9" |
Dry weight | 49 lbs. |
Fuel Capacity | 0.53 gal |
Run Time @ Max Discharge | 1.5 hr |
Strainer Part # | 78325-YB7-020 |
Residential Warranty | 3 years |
Commercial Warranty | 3 years |
General | |
Power source | Gas |
Application | Commercial |
Inventory | |
Condition | New |
Location | El Cerrito, CA |