Honda WB30 (WB30XT3) Water Pump, GX160
$799.00
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Features
- General purpose, centrifugal 3" pump
- Easy starting Honda OHV commercial engine
- 290 gal./min. capacity
- Silicon carbide mechanical seal
- Cast iron volute and impeller
Specifications
Engine | GX160 |
Displacement | 163cc |
Bore and stroke | 2.7" x 1.8" |
Compression Ratio | 9.0:1 |
Oil Alert | Std |
Pump type | Centrifugal, Self-priming |
Volute | Rigid Mounted Cast Iron |
Impeller | 4 Vane Cast Iron |
Mechanical Seal (Pump case / impeller) | Silicon Carbide/Silicon Carbide |
Priming time | 150 sec @16.4 ft. |
Drive system | Direct |
Discharge capacity | 290 gal/min |
Suction port diameter | 3" NPT |
Discharge port diameter | 3" NPT |
Total head lift | 85 ft. |
Suction head lift | 25 ft. |
Maximum pressure | 37 psi |
Solids handling | N/A |
Dimensions (LxWxH) | 20.1"x 15.2" x 17.9" |
Dry weight | 57 lb. |
Fuel Capacity | 0.82 gal |
Run Time @ Max Discharge | 1.9 hr |
Strainer Part # | 78325-YG4-000 |
Residential Warranty | 3 years |
Commercial Warranty | 3 years |
General | |
Power source | Gas |
Application | Commercial |
Inventory | |
Condition | New |
Location | El Cerrito, CA |