Honda GX160UT2-SMC7 General Purpose Engine
$545.95
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
20mm Metrict shaft
Honda’s GX series engines are legendary for superior reliability and performance. And there’s no doubt about it: the GX160 lives up to the legend. Lower noise levels, lower vibration, and lower emissions – without sacrificing power output or performance.
COMMON APPLICATIONS
- Pressure washers
- Commercial lawn and garden equipment
- Tillers / cultivators
- Generators
- Construction / industrial equipment
- Agricultural equipment
- Water pumps
Specifications
Engine Type | Air-cooled 4-stroke OHV |
Bore x Stroke | 68 X 45 mm |
Displacement | 163 cm3 |
Net Power Output* | 4.8 HP (3.6 kW) @ 3,600 rpm |
Net Torque | 7.6 lb-ft (10.3 Nm) @ 2,500 rpm |
PTO Shaft Rotation | Counterclockwise (from PTO shaft side) |
Compression Ratio | 9.0 : 1 |
Lamp/Charge coil options | 25W, 50W / 1A, 3A, 7A |
Carburetor | Butterfly |
Ignition System | Transistorized magneto |
Starting System | Recoil Starter |
Lubrication System | Splash |
Governor System | Centrifugal Mechanical |
Air cleaner | Dual Element |
Oil Capacity | 0.61 US qt. (0.58 L) |
Fuel Tank Capacity | 3.3 U.S. qts (3.1 liters) |
Fuel | Unleaded 86 octane or higher |
Dry Weight | 33 lbs. (15.1 kg) |
Dimensions | |
Length (min) | 12.2" (312 mm) |
Width (min) | 14.3" (362 mm) |
Height (min) | 13.6" (346 mm) |
PTO Shaft Options | |
H type | Reduction type PTO |
L type | Reduction type PTO |
Q type | Straight shaft |
R type | Reduction type PTO |
S type | Straight shaft (metric) |
T type | Straight shaft |
V type | Tapered shaft |
General | |
Power source | Gas |
Application | Commercial |
Inventory | |
Condition | New |