700-WS can be used on
Manufactures | Molde |
Bandit | HB19X, HB19, HB19SP, HB20, HB20X, 2000, 2100, 2150XP, 2250XP |
Barreto | 13SGH/16SGB, SG30, 30-SGB |
Beeline | Sunrise Concept |
Bobcat | Attachment SG30 |
Bradco | SG26 |
Carlton | SP2000, 2300, (2003) 2400-4*, PRE-2000) 2500*, 2700-4, 4012*, SP5014 TRX |
Dosko | 620, 691 |
Erskine | Stump Grinder |
Hawk | 20 HP |
Jenkins Iron & Steel | Stump Grinder |
LandPride | GR1525 |
Powertek | 16-20 HP |
Ram | Model 20 |
Rayco | RG 20, RG 25HD, RG 1620 JR, 1625 Super Jr, RG 27 SP JR, RG 35 SP JR, RG 37 SP JR, RG 1631 SP JR, RG 1635 SP JR, RG 1635 Track JR, RG 40 SP JR, RG 1645 S, RG 45 SP JR |
Terra | SG-13 |
Terex | TSG538T |
Toro | SGR-13, STX26, STX-38, Dingo Attachment |
Ventrac | Attachment, 206, 222, SC 252, SC 292, SC 362, 630 A 630 B |
Wearsharp™ Teeth are larger than the 500 series and have an innovative design allowing them to retain a sharp cutting surface over time! This increases the lifespan and durability of each tooth. These teeth utilize the pockets of their corresponding 700 series.
Specifications:
Series: 700 Series
Type: Wearsharp™
Wrench Size: 1/2″
Bolt Torque (ft lbs): 180 (w/GREEN-SEIZE™ or 240 dry)
- Nut Torque (ft lbs): 25
Pocket Compatibility: For use with 700 Series pockets only
SINGLE CYLINDER REPAIR
If you have any questions about any products . Please email us at info@singlecylinderstore.com or call us at 877-558-1112
| General | |
| Application | Commercial |
| Inventory | |
| Condition | New |
