Grabo GP-1LI-FB Pro-Lifter 20, Pro Vacuum Seal Lifter, 375 lbs
$299.00
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Features
- The electric suction cup constantly monitors the vacuum pressure. If pressure is lost the pump automatically replaces lost pressure until the restored
- Features a digital display, smart digital pressure sensor, and smart settings for both weight and pressure
- Strong and resistant to loss of vacuum pressure
- Attachable to almost any flat surface with a lifting power of 375 lbs
- Composed of 14.8 volts 2600 mAh Li-ion removable battery
- Pump stops automatically at maximum vacuum rate (11.6 PSI / 0.8 Bar)
Specifications
Equipment Type | Lifting Equipment |
Airflow | 0.7cfm (20 L/min) |
Battery | 14.8VDC, 2600mAh Li-ion |
Capacity | 375 lbs Lift Capacity |
Charge Hold | 30 Days Stand-by Mode |
Charge Time | Approx 2hrs |
Cycle Time | 900 ON-OFF Cycles of 10 Sec. |
Dry Weight | 3.2 lbs (with Battery) |
Input Voltage | 100-240VAC 50/60Hz |
Item No_ | GP-1LI-FB.GRAB |
PSI | 11.6 PSI Vacuum Rate |
Run Time | 1.5hrs (Full Charge) |
Watts | 16W |
SINGLE CYLINDER REPAIR
If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112
| General | |
| Power source | Battery |
| Application | Commercial |
| Inventory | |
| Condition | New |
