General Pipe Cleaners P-T4-C Sewerooter T-4 w/ 100 EM3A (100 ft. x 9/16”), EJCS Cutter Set 104130

Sewerooter T-4 with 100 EM3A (100 ft. x 9/16”) cable, Power Cable Feed, Guide Tube, and EJCS Cutter Set

Features

• Does a better job of clearing inside drain lines up to 100 ft. long with 9/16” Flexicore cable.
• Has more torque than traditional 1/2 inch cables, yet it can be used to clear the same 3” to 4” drain lines.
• Switch to 75 ft. x 5/8” cable to add root cutting capability. Easily interchangeable drums.
• Variable speed power cable feed drives and retracts 9/16”, 5/8” and 3/4” cable at up to 20 ft. per minute.
• Handle folds for space-saving convenience in the truck.

• Drum capacity of 100 ft. of 9/16” cable, 75 ft. of 5/8” cable or 50 ft. of 3/4” cable.
• 1/3 hp capacitor motor has plenty of power to drive more than 100 ft. of cable.
• Features stair climbers, 10” ball bearing wheels, and truck loading wheel for easier handling.
• Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility.
• Made in U.S.A.

Specifications

• Weight: 92 lbs. (42 kg) without cable
• Dimensions: 27” (68.5 cm) deep, 18-1/2” (47 cm) wide, 46” (117 cm) high; 26” (66 cm) with handle folded down.
• Drum Capacity: 100 ft. x 9/16″ (30m x 14.2), 75 ft. x 5/8″ (22.5m x 15.8)
• Drum Removal: Remove one bolt and slide drum off shaft.
• Motor: 1/3 hp with capacitor, forward-off-reverse switch, 20 ft. power cord and ground fault circuit interrupter.
• Foot Switch: Pneumatic, with no electrical contact between pedal and motor.
• Power Cable Feed: Drives and retracts at variable speed of up to 20 ft. per minute.
• Wheels: 10” Heavy-duty wheels with roller bearings.
• Wheel Brake: Passive wheel brake system holds the machine in place on the job or in the truck.
• Stair Climbers: Heavy-duty V-belts running on nylon rollers.
• Truck Loading Wheel: Enables one person to lift machine onto bed of truck.
• Cutter Holder: Cutter Holder on frame keeps all of the cutters within easy reach.
• Leather Gloves: With double-reinforced palm for hand protection when guiding cable.
• Cables: Left-wound Flexicore® wire rope center. 3/4″ for 4″ to 10″ lines and 3″ lines without sharp bends; 5/8″ diameter for 3″ to 6″ lines; 1/2″ diameter for 2″ to 3″ lines.
• Cable Guide Tube: Adds safety when you can’t get machine close to drain opening. 5 ft. extensions available.

SINGLE CYLINDER REPAIR

If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112.