General Equipment Company SP8GH9HP Surface Planer, Gas, 9Hp, 8W

California Proposition 65 Warning

WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Features

Power Source: 9.0 HP Honda
Maximum Cutting Depth: .625 inch
Quik-Pitch™ drum raise/lower system
Back-Saver™ cutting depth adjustment system
Pow-R-Pivot™ center balance system
Maximum Cutting Width: 8.0 inches

Specifications

POWER SOURCE

Type: Honda, GX270, 4-stroke
Horse Power: 9.0 HP (6.7 Kw)
Starter: Hand rewind
Fuel: Gasoline, unleaded automotive grade

FRAME

Structure: Unitized, welded steel plate
Bearings: High capacity, externally greased Zerk® type fittings
Driveshaft Connection: 1.125 inch (28.8 mm) full length extension
Drum Engagement: Raise/lower drum with Quik-Pitch™
Cutting Depth Adjustment: Screw type with Back-Saver™
Maximum Cutting Depth: .625 inch (15.9 mm)
Maximum Cutting Width: 8.0 inch (203.2 mm)
Dust Port Connection: 3.0 inch (76.2 mm)

GENERAL

Width: 16.7 inches (424.2 mm)
Height: 37.5 inches (952.5 mm)
Length: 42.8 inches (1087.1 mm)

SINGLE CYLINDER REPAIR

If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112.

General
Power source	Gas
Application	Commercial
Inventory
Condition	New

Same Brand
Same Category

General Equipment 102-1000 Standard moil point, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$55.39

General Equipment 102-1100 Standard narrow chisel, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$55.39

General Equipment 102-1200 Standard 3 inch chisel, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$80.33

General Equipment 102-1400 Chisel, 5inch

1-1/8 inch hex x 6 inch shank, 5 inch asphalt spade accessory tool. Used for removing thinset-type materials from concrete surfaces. Forged from a..

$189.00

General Equipment 102-1500A Chisel, 5inch

1-1/8 inch hex x 6 inch shank, scraper blade accessory tool. Used with scraper blades to remove material buildups and thinset-type materials from co..

$193.00

General Equipment 130C Clamp Mount Cut-R-Tach, 13.5 inches

Bucket Mount, 13.5 inch diameter blade, 5.0 inch maximum cutting depth. Twin Oilite®-type, sleeve bearings, 25,000 lbs maximum down force capacity. No..

$2,095.25

General Equipment 130C-0020A Steel Blade for 130 CUT-R-TACH

Description: Replacement Cutting Blade. Complete with Oilite®-Type, Sleeve Bearings and Hub.Product Application: 130 Series CUT-R-T..

$866.00

General Equipment 190C Clamp Mount Cut-R-Tach, 19 inches

190C Clamp Mount CUT-R-TACH® Rotary Asphalt Cutting AttachmentBucket Mount, 19.0 inch diameter blade, 5.5 inch maximum cutting depth. Twin Timken®-typ..

$2,755.00

General Equipment 190C-0010 Steel Blade for 130 CUT-R-TACH

Description: Replacement Cutting Blade. Complete with Oilite®-Type, Sleeve Bearings and Hub.Product Application: 190 Series General..

$925.85

General Equipment 190M Moldboard Mount Cut-R-Tach, 19 inches

190C Clamp Mount CUT-R-TACH® Rotary Asphalt Cutting AttachmentBucket Mount, 19.0 inch diameter blade, 5.5 inch maximum cutting depth. Twin Timken®-typ..

$3,485.05

General Equipment 190MB Mounting Block, used with 190S

Scarifier Mount (1” x 3” shank), 19 inch diameter blade, 5-1/2 inches maximum cutting depth. Twin Timken®-type, tapered roller bearings, 50,000 lbs ma..

$687.00

General Equipment 190S Scarifier Mount Cut-R-Tach, 19 inches

Scarifier Mount (1” x 3” shank), 19 inch diameter blade, 5-1/2 inches maximum cutting depth. Twin Timken®-type, tapered roller bearings, 50,000 lbs ma..

$2,050.00

General Equipment 2350-10E 10 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-10E Flighting OD 10 inch ..

$320.00

General Equipment 2350-12E 12 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-12E Flighting OD 12 inch ..

$396.00

General Equipment 2350-2E 2-1/4 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-2E Flighting OD 2-1/4 inc..

$185.00

General Equipment 2350-3E 3-1/4 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-3E Flighting OD 3-1/4 inc..

$190.00

General Equipment 4400-14E3 14" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$560.00

General Equipment 4400-16E3 16" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$895.00

General Equipment 4400-18P 18" Earth Auger

Specifications Part No. 4400-18P Flighting OD..

$835.00

General Equipment 4400-2E3 2-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$362.85

General Equipment 4400-3E3 3-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$358.85

General Equipment 4400-4E3 4-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$364.00

General Equipment 4450-12E3 12" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$480.00

General Equipment 4450-6E3 6 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® ..

$400.00

General Equipment 4450-8E3 8" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$415.00

American Sanders 07057A-734371 Drum Sander Ez-8 Clamp Drum

Sold Out

FeaturesEasy release latch allows the machine to break down into multiple pieces for transportation. Heavy duty 1.5 hp dual capacitor motor p..

$5,080.00

American Sanders 07076B-709726 Floor Sander Orbital OBS-18

-18 % Sold Out

FeaturesThe totally enclosed, fan cooled motor, eliminates overheating and the need for motor cleaning. Heavy duty cast aluminum main fr..

$3,542.40 $4,295.00

American Sanders 07081B-709727 Floor Sander Orbital Dust Control OBS-18DC

-17 %

FeaturesHeavy duty 1.5 hp dual capacitor motor provides power for the most demanding jobs. The motor is totally enclosed, keeping it dust fre..

$4,220.80 $5,080.00

American Sanders 07125A-709729 Edger Super 7R with Case

-4 %

FeaturesPrecision-balanced sanding pad produces finer finish. Hardened steel pinion with brass drive gear reduces vibration. Powerful 1 ..

$2,725.55 $2,842.61

American Sanders 07164A E-Z Sand Orbital Sander

-8 %

FeaturesPowerful three-motor, triple-head design that allows it to effectively sand large, open areas Compact design makes it easy to sand ed..

$3,305.67 $3,595.67

American Sanders 61879A Conversion Kit EZ8 Vac

-15 % Online-Only

American Sanders 61879A Conversion Kit EZ8 VacKit includes 30563A Adaptor Tube 53741A Dust Bag 61897A Dust PipeSINGLE CYLIND..

$117.91 $137.91

Essex Silver-Line SL1218OVS.ESS Orbital Polisher, 12 x 18 w/DC

Sold Out

Essex Silver Line’s SL1218OVS 12” x 18” Orbital Polisher/Refinisher offers a 1.5hp motor, rugged cast aluminum base with weight built into the chassis..

$3,192.00

Essex Silver-Line SL1218R.ESS Orbital Polisher, 12 x 18

Features Applications include: screening floors after sanding, screen and re-coating polyurethane floors, waxed floors scrubbing and polis..

$2,659.00

Essex Silver-Line SL7.ESS Floor Edger, 7", 1.5 HP

Features Constructed with interchangeable parts of highly polished aluminum alloys Disc pad is precision balanced and rubber backed with..

$2,549.00

Essex Silver-Line SL8.ESS Floor Sander, 1.5 HP

Features Sealed motor keeps sawdust out and keeps machine running longer Soft rubber drum and unique spring-loaded cam locking system fo..

$4,499.00

Essex Silver-Line SL8V2.ESS Floor Sander, 1.5 HP (H & L drum)

Sold Out

FeaturesThe SL-8V2 Hook & Loop Floor Sander offers a new alternative for the rental market. Developed, Engineered, & Manufactured By Es..

$3,501.00

Essex Silver-Line U2D.ESS Underadiator with Dust collection, 5"

Sold Out

The U2D from Silver-Line is designed to do the job effectively and inexpensively and can be hooked up to a vacuum!The Silver-Line U2D Underadiator..

$854.00

General Equipment 102-1000 Standard moil point, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$55.39

General Equipment 102-1100 Standard narrow chisel, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$55.39

General Equipment 102-1200 Standard 3 inch chisel, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$80.33

General Equipment 102-1400 Chisel, 5inch

1-1/8 inch hex x 6 inch shank, 5 inch asphalt spade accessory tool. Used for removing thinset-type materials from concrete surfaces. Forged from a..

$189.00

General Equipment 102-1500A Chisel, 5inch

1-1/8 inch hex x 6 inch shank, scraper blade accessory tool. Used with scraper blades to remove material buildups and thinset-type materials from co..

$193.00

General Equipment 130C Clamp Mount Cut-R-Tach, 13.5 inches

Bucket Mount, 13.5 inch diameter blade, 5.0 inch maximum cutting depth. Twin Oilite®-type, sleeve bearings, 25,000 lbs maximum down force capacity. No..

$2,095.25

General Equipment 130C-0020A Steel Blade for 130 CUT-R-TACH

Description: Replacement Cutting Blade. Complete with Oilite®-Type, Sleeve Bearings and Hub.Product Application: 130 Series CUT-R-T..

$866.00

General Equipment 190C Clamp Mount Cut-R-Tach, 19 inches

190C Clamp Mount CUT-R-TACH® Rotary Asphalt Cutting AttachmentBucket Mount, 19.0 inch diameter blade, 5.5 inch maximum cutting depth. Twin Timken®-typ..

$2,755.00

General Equipment 190C-0010 Steel Blade for 130 CUT-R-TACH

Description: Replacement Cutting Blade. Complete with Oilite®-Type, Sleeve Bearings and Hub.Product Application: 190 Series General..

$925.85

General Equipment 190M Moldboard Mount Cut-R-Tach, 19 inches

190C Clamp Mount CUT-R-TACH® Rotary Asphalt Cutting AttachmentBucket Mount, 19.0 inch diameter blade, 5.5 inch maximum cutting depth. Twin Timken®-typ..

$3,485.05

General Equipment 190MB Mounting Block, used with 190S

Scarifier Mount (1” x 3” shank), 19 inch diameter blade, 5-1/2 inches maximum cutting depth. Twin Timken®-type, tapered roller bearings, 50,000 lbs ma..

$687.00