General Equipment Company DB810 Dust Collection Bag

California Proposition 65 Warning

WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Features:

85% filtration efficiency
Washable, non-woven polyester
Available in 8, 12, & 16 inch nomimal diameters

Operating Environment	General purpose, non-hazardous type locations
Part Number	DB810: For use with 8 inch (203 mm) nominal blowers
Material	Non-woven polyester
Filtration Standard	European Norm EN1822:2009, Efficiency Particulate Filter (EPA) Class E10, total retention greater than 85 percent
Approximate Filter Area	DB810: 40 ft², DB1210: 50 ft², DB1610: 73 ft²
Attachment Method	Cinch-type strap
Cleaning Method	Wash up to 2 times using procedures that comply with applicable health and safety regulations
Available Nominal Diameters	DB810: 8 inch (203 MM)
Length	9.8 ft (3 m)

SINGLE CYLINDER REPAIR

If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112.

General
Application	Commercial
Inventory
Condition	New

Same Brand
Same Category

General Equipment 102-1000 Standard moil point, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$55.39

General Equipment 102-1100 Standard narrow chisel, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$55.39

General Equipment 102-1200 Standard 3 inch chisel, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$80.33

General Equipment 102-1400 Chisel, 5inch

1-1/8 inch hex x 6 inch shank, 5 inch asphalt spade accessory tool. Used for removing thinset-type materials from concrete surfaces. Forged from a..

$189.00

General Equipment 102-1500A Chisel, 5inch

1-1/8 inch hex x 6 inch shank, scraper blade accessory tool. Used with scraper blades to remove material buildups and thinset-type materials from co..

$193.00

General Equipment 130C Clamp Mount Cut-R-Tach, 13.5 inches

Bucket Mount, 13.5 inch diameter blade, 5.0 inch maximum cutting depth. Twin Oilite®-type, sleeve bearings, 25,000 lbs maximum down force capacity. No..

$2,095.25

General Equipment 130C-0020A Steel Blade for 130 CUT-R-TACH

Description: Replacement Cutting Blade. Complete with Oilite®-Type, Sleeve Bearings and Hub.Product Application: 130 Series CUT-R-T..

$866.00

General Equipment 190C Clamp Mount Cut-R-Tach, 19 inches

190C Clamp Mount CUT-R-TACH® Rotary Asphalt Cutting AttachmentBucket Mount, 19.0 inch diameter blade, 5.5 inch maximum cutting depth. Twin Timken®-typ..

$2,755.00

General Equipment 190C-0010 Steel Blade for 130 CUT-R-TACH

Description: Replacement Cutting Blade. Complete with Oilite®-Type, Sleeve Bearings and Hub.Product Application: 190 Series General..

$925.85

General Equipment 190M Moldboard Mount Cut-R-Tach, 19 inches

190C Clamp Mount CUT-R-TACH® Rotary Asphalt Cutting AttachmentBucket Mount, 19.0 inch diameter blade, 5.5 inch maximum cutting depth. Twin Timken®-typ..

$3,485.05

General Equipment 190MB Mounting Block, used with 190S

Scarifier Mount (1” x 3” shank), 19 inch diameter blade, 5-1/2 inches maximum cutting depth. Twin Timken®-type, tapered roller bearings, 50,000 lbs ma..

$687.00

General Equipment 190S Scarifier Mount Cut-R-Tach, 19 inches

Scarifier Mount (1” x 3” shank), 19 inch diameter blade, 5-1/2 inches maximum cutting depth. Twin Timken®-type, tapered roller bearings, 50,000 lbs ma..

$2,050.00

General Equipment 2350-10E 10 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-10E Flighting OD 10 inch ..

$320.00

General Equipment 2350-12E 12 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-12E Flighting OD 12 inch ..

$396.00

General Equipment 2350-2E 2-1/4 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-2E Flighting OD 2-1/4 inc..

$185.00

General Equipment 2350-3E 3-1/4 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-3E Flighting OD 3-1/4 inc..

$190.00

General Equipment 4400-14E3 14" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$560.00

General Equipment 4400-16E3 16" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$895.00

General Equipment 4400-18P 18" Earth Auger

Specifications Part No. 4400-18P Flighting OD..

$835.00

General Equipment 4400-2E3 2-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$362.85

General Equipment 4400-3E3 3-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$358.85

General Equipment 4400-4E3 4-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$364.00

General Equipment 4450-12E3 12" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$480.00

General Equipment 4450-6E3 6 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® ..

$400.00

General Equipment 4450-8E3 8" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$415.00

General Equipment 102-1000 Standard moil point, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$55.39

General Equipment 102-1100 Standard narrow chisel, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$55.39

General Equipment 102-1200 Standard 3 inch chisel, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$80.33

General Equipment 102-1400 Chisel, 5inch

1-1/8 inch hex x 6 inch shank, 5 inch asphalt spade accessory tool. Used for removing thinset-type materials from concrete surfaces. Forged from a..

$189.00

General Equipment 102-1500A Chisel, 5inch

1-1/8 inch hex x 6 inch shank, scraper blade accessory tool. Used with scraper blades to remove material buildups and thinset-type materials from co..

$193.00

General Equipment 130C Clamp Mount Cut-R-Tach, 13.5 inches

Bucket Mount, 13.5 inch diameter blade, 5.0 inch maximum cutting depth. Twin Oilite®-type, sleeve bearings, 25,000 lbs maximum down force capacity. No..

$2,095.25

General Equipment 130C-0020A Steel Blade for 130 CUT-R-TACH

Description: Replacement Cutting Blade. Complete with Oilite®-Type, Sleeve Bearings and Hub.Product Application: 130 Series CUT-R-T..

$866.00

General Equipment 190C Clamp Mount Cut-R-Tach, 19 inches

190C Clamp Mount CUT-R-TACH® Rotary Asphalt Cutting AttachmentBucket Mount, 19.0 inch diameter blade, 5.5 inch maximum cutting depth. Twin Timken®-typ..

$2,755.00

General Equipment 190C-0010 Steel Blade for 130 CUT-R-TACH

Description: Replacement Cutting Blade. Complete with Oilite®-Type, Sleeve Bearings and Hub.Product Application: 190 Series General..

$925.85

General Equipment 190M Moldboard Mount Cut-R-Tach, 19 inches

190C Clamp Mount CUT-R-TACH® Rotary Asphalt Cutting AttachmentBucket Mount, 19.0 inch diameter blade, 5.5 inch maximum cutting depth. Twin Timken®-typ..

$3,485.05

General Equipment 190MB Mounting Block, used with 190S

Scarifier Mount (1” x 3” shank), 19 inch diameter blade, 5-1/2 inches maximum cutting depth. Twin Timken®-type, tapered roller bearings, 50,000 lbs ma..

$687.00