General Equipment Company FCS16GEN3 Floor Covering Stripper, 16&quot;

California Proposition 65 Warning

WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Features

10.0 inch maximum cutting blade width
3-bolt blade clamping system
Adjustable, folding operator handle
Back-Saver™ Blade Angle Control System
Integral front lift handle
Integral, concealed static weights
Magnetic-type ON/OFF switch
37.0 foot extension cord w/GFCI

Specifications

Operating Environment: Non-hazardous type locations
Electric Motor: .75 HP (.56 Kw), 115 VAC, 60 HZ, 15.0 amperes
Nominal Oscillations: 1725/minute
Frame: Unitized, welded steel plate
Bearings: Ball-type
Drive System: Direct
Extension Cord: 12-3, SJTW x 37.0 ft. (11.3 M) length w/GFCI
Width, base unit @ caster wheels: 14.1 inches (358.1 mm)
Width, operator handle: 23.1 inch (586.7 mm)
Height, operator handle extended: 37.0 inches (939.8 mm)
Length, operator handle extended, less blade: 39.5 inches (1003.3 mm)
Length, operator handle folded/retracted, less blade: 24.4 inches (619.8 mm)
Weight: 137.2 lbs (62.2 kg), less blade and extension cord

Part Number: 10619

SINGLE CYLINDER REPAIR

If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-111

General
Power source	Electric
Application	Commercial
Inventory
Condition	New

Same Brand
Same Category

General Equipment 102-1000 Standard moil point, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$55.39

General Equipment 102-1100 Standard narrow chisel, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$55.39

General Equipment 102-1200 Standard 3 inch chisel, 1-1/8 inch hexagon shank

It just might be the most useful hand operated construction tool to come along in the last decade. Produces an incredible 1450 ft. lbs. of energy per ..

$80.33

General Equipment 102-1400 Chisel, 5inch

1-1/8 inch hex x 6 inch shank, 5 inch asphalt spade accessory tool. Used for removing thinset-type materials from concrete surfaces. Forged from a..

$189.00

General Equipment 102-1500A Chisel, 5inch

1-1/8 inch hex x 6 inch shank, scraper blade accessory tool. Used with scraper blades to remove material buildups and thinset-type materials from co..

$193.00

General Equipment 130C Clamp Mount Cut-R-Tach, 13.5 inches

Bucket Mount, 13.5 inch diameter blade, 5.0 inch maximum cutting depth. Twin Oilite®-type, sleeve bearings, 25,000 lbs maximum down force capacity. No..

$2,095.25

General Equipment 130C-0020A Steel Blade for 130 CUT-R-TACH

Description: Replacement Cutting Blade. Complete with Oilite®-Type, Sleeve Bearings and Hub.Product Application: 130 Series CUT-R-T..

$866.00

General Equipment 190C Clamp Mount Cut-R-Tach, 19 inches

190C Clamp Mount CUT-R-TACH® Rotary Asphalt Cutting AttachmentBucket Mount, 19.0 inch diameter blade, 5.5 inch maximum cutting depth. Twin Timken®-typ..

$2,755.00

General Equipment 190C-0010 Steel Blade for 130 CUT-R-TACH

Description: Replacement Cutting Blade. Complete with Oilite®-Type, Sleeve Bearings and Hub.Product Application: 190 Series General..

$925.85

General Equipment 190M Moldboard Mount Cut-R-Tach, 19 inches

190C Clamp Mount CUT-R-TACH® Rotary Asphalt Cutting AttachmentBucket Mount, 19.0 inch diameter blade, 5.5 inch maximum cutting depth. Twin Timken®-typ..

$3,485.05

General Equipment 190MB Mounting Block, used with 190S

Scarifier Mount (1” x 3” shank), 19 inch diameter blade, 5-1/2 inches maximum cutting depth. Twin Timken®-type, tapered roller bearings, 50,000 lbs ma..

$687.00

General Equipment 190S Scarifier Mount Cut-R-Tach, 19 inches

Scarifier Mount (1” x 3” shank), 19 inch diameter blade, 5-1/2 inches maximum cutting depth. Twin Timken®-type, tapered roller bearings, 50,000 lbs ma..

$2,050.00

General Equipment 2350-10E 10 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-10E Flighting OD 10 inch ..

$320.00

General Equipment 2350-12E 12 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-12E Flighting OD 12 inch ..

$396.00

General Equipment 2350-2E 2-1/4 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-2E Flighting OD 2-1/4 inc..

$185.00

General Equipment 2350-3E 3-1/4 inch Bor-Max Diameter Earth Auger

1 Inch Diameter Round Female Hub ConnectionSpecifications Part No. 2350-3E Flighting OD 3-1/4 inc..

$190.00

General Equipment 4400-14E3 14" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$560.00

General Equipment 4400-16E3 16" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$895.00

General Equipment 4400-18P 18" Earth Auger

Specifications Part No. 4400-18P Flighting OD..

$835.00

General Equipment 4400-2E3 2-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$362.85

General Equipment 4400-3E3 3-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$358.85

General Equipment 4400-4E3 4-1/4 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$364.00

General Equipment 4450-12E3 12" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$480.00

General Equipment 4450-6E3 6 inch Diameter Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® ..

$400.00

General Equipment 4450-8E3 8" Earth Auger

General Equipment Company offers a complete line of earth augers and extensions for the 330H, 332H and 660 DIG-R-MOBILE® hole digg..

$415.00

Brave BRPFS105E Compact Floor Stripper

FeaturesComes standard with two blades: 6" and 10" Anti-Vibe™ caster wheels Quik-A Tach™ composite handle Heavy-duty, sealed ball bearin..

$1,724.00

Brave BRPFS108E Compact Floor Stripper

FeaturesComes standard with two blades: 6" and 10" Unitized, welded steel frame Back-Saver™ Blade Control System (On-the-fly blade angle a..

$2,446.00

Edco 64308 7" X 1" Spacer For Cpu-10FC

-25 % Pre-Order

Genuine OEM EdcoEdco 64308 7" X 1" Spacer For Cpu-10FC SINGLE CYLINDER REPAIRIf you have any questions about..

$79.00 $105.66

Edco ALR-2 Chisel Scaler Pneumatic 2' Steel (C10309)

Call/Text 510-761-1112 for info

Edco ALR-2 Chisel Scaler Pneumatic 2' Steel (C10309)FEATURES / BENEFITSALR-2 Removes up to 200 sq. ft. per hour of 4 ceramic tile set in ..

$0.00

Edco ALR-2A Chisel Scaler Pneumatic 2' Alum (C10309A)

Edco C10309A Chisel Scaler Pneumatic 2' AlumFEATURES / BENEFITSALR-2A Removes up to 200 sq. ft. per hour of 4 ceramic tile set in standar..

$1,106.90

Edco ALR-4 Chisel Scaler Pneumatic 4' Steel (C10308)

Call/Text 510-761-1112 for info

Edco C10308 Chisel Scaler Pneumatic 4' SteelFEATURES / BENEFITSRemoves up to 200 sq. ft. per hour of 4 ceramic tile set in standard thin-se..

$0.00

Edco ALR-5 Chisel Scaler Pneumatic 5' Steel (C10301)

Edco ALR-5 Chisel Scaler Pneumatic 5' Steel (C10301)FEATURES / BENEFITSALR-5 Removes up to 200 sq. ft. per hour of 4 ceramic tile set in ..

$1,252.00

Edco ALR-BS-ERGO Big Stick Chisel Scaler 5' Ergo (27100)

Edco 27100 Big Stick Chisel Scaler 5' ErgoFEATURES / BENEFITSALR-BS-Ergo Remove up to 300 sq. ft. per hour of 4 ceramic tile set in stand..

$2,019.02

Edco ALR-BS-STRAIGHT Big Stick Chisel Scaler 5' (27200)

Call/Text 510-761-1112 for info

Edco 27200 Big Stick Chisel Scaler 5'FEATURES / BENEFITSALR-BS-Straight Remove up to 300 sq. ft. per hour of 4 ceramic tile set in standa..

$0.00

Edco ALR-E Chisel Scaler Pneumatic Ergo C10342

Edco ALR-E Chisel Scaler Pneumatic Ergo C10342FEATURES / BENEFITSALR-E Removes up to 200 sq. ft. per hour of 4 ceramic tile set in standa..

$1,259.98

Edco ALR5-A Chisel Scaler Pneumatic 5' Alum (C10301A)

Call/Text 510-761-1112 For Price

Edco C10301A Chisel Scaler Pneumatic 5' AlumFEATURES / BENEFITSALR5-A Removes up to 200 sq. ft. per hour of 4 ceramic tile set in standar..

$0.00

Edco TS-8 Tile Shark Floor Stripper 8" (94400)

Edco TS-8 Tile Shark Floor Stripper 8" (94400)FEATURES / BENEFITS3/4HP, 115V Remove up to 200 sq. ft. per hour of vinyl or other related ..

$2,199.00

General Equipment Company FCS10GEN2 Floor Covering Stripper, 10"

Features 10.0 inch maximum cuttingblade width. Unitized, welded steel frame. Anti-Vibe™ caster wheels. Detachable steeloperator hand..

$1,995.00

General Equipment Company FCS18 Stripper, Propelled, 115Vac, 18W

-36 %

Built to efficiently remove VCT tiles, rubber-backed carpeting and sheet type coverings from concrete surface, the RIP-R-STRIPPER® will make quick wor..

$7,665.00 $11,995.00

General Equipment Company FCS5AC Floor Stripper

Features and BenefitsFloor Coverings Stripper 1400W 115 VAC 60 HZ 12 Amperes Electric Motor 5 Inch Maximum Cutting Blade Width. ..

$1,204.00

Husqvarna 970615002 BS 75 Floor Scraper 110-120 V

BS 75 is a powerful self-propelled machine, ideal for indoor and outdoor medium-sized renovation jobs. This floor scraper is constructed of rugge..

$7,988.00

Husqvarna 970615101 BS 110 Floor Scraper 110-120 V

BS 110 is a powerful self-propelled machine, ideal for indoor and outdoor medium-sized renovation jobs. This floor scraper is constructed of rugg..

$10,448.00

Husqvarna 970615302 BMS 280P Propane Floor Scraper

Call/Text 510-761-1112 for info

BMS 280P is a propane driven ride-on floor scraper that is quick, agile and highly effective for large area surface removal. This machine signifi..

$0.00

Husqvarna 970615404 BMS 220ADBP ropane Floor Scraper

BMS 220ADB ride-on scraper is ideally suited for medium and large-sized applications with the added benefit of being battery operated for increas..

$41,520.00

Husqvarna 970615501 BMS 220 Propane Floor Scraper

BMS 220P is a propane-driven and highly productive ride-on floor scraper that is ideal for medium and large sized applications. It is suitable fo..

$40,680.00

Makinex JHT-U-2 Jack Hammer Trolley

Pre-Order

Compatible for the following Jackhammers: Hilti TE1500, Hilti TE1000, Makita HM1317, Makita HM1307, Makita HM1502, Makita HM1512, Bosch 11335K, H..

$1,395.00

Makinex VS-125-US Vinyl Stripper USA Spec

Makinex VS-125-US Vinyl Stripper USA Spec

-4 %

FEATURES / BENEFITSHaving a transportable stripper, so I can work anywhere Having enough downward force over the blade to lift vinyl A cost..

$2,199.00 $2,295.00

MK Diamond MK-VTS50 Floor Scraper

Call/Text 510-761-1112 for info

The MK Diamond Floor Scraper is a compact stripper that is both durable and easy to use. Both lightweight and portable, it is easily handed by a singl..

$0.00