Husqvarna DM 220 110V Handheld Drill Motor 966563503
$2,385.00
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Applications
- Used for handheld drilling up to 4".
- Mount on DS 250 drills tand to drill holes up to 6" or angle drill. Can be used with a vacuum for dust free project.
- Vac port comes standard for dry applications such as drilling bricks, blocks or other building materials.
- Used for wet applications when drilling reinforced concrete.
- Perfect tool for drilling smaller holes for ventilation, plumbing pipes, joints, electrical sockets and telecom cable openings.
Benefits
- Motor can tolerate and perform effectively in higher ambient temperatures.
- Gearbox and motor alignment have been updated to reduce friction and improve sturdiness.
- Equipped with a LED indicator that shows when the machine is in a vertical or horizontal position and can also be calibrated to help guide the operator while angle drilling.
- The positioning system makes it possible for the operator to focus on drilling while controlling the position of the machine via the LED indicators.
- Softstart™ slowly increases motor RPMs when starting, which reduces wear on the motor and brushes.
Specifications | |
Maximum bit diameter with stand, in (mm) | 6 (150) |
Maximum bit diameter handheld, in (mm) | 4 (100) |
Power, hp (kW) | 2.3 (2) |
Motor | 1-Phase, Electric |
Voltage, V | 230/115 |
Rated output, watts | 1,200 |
Rated current, amps | 8/15 |
Speeds | 3 |
Spindle Speed no load, rpm | 900/2,150/4,500 |
Spindle Speed full load , rpm | 500/1,400/2,900 |
Spindle thread, inner | 5/8-11 |
Spindle thread, outer | 1-1/4-7 |
UNC water coupling | G 1/4" |
Sound pressure level, dB(A) | 90 |
Sound power level, dB(A) | 94 |
Weight, lbs (kg) | 15.4 (7) |
| General | |
| Application | Commercial |
| Inventory | |
| Condition | New |
