Husqvarna 970449401 DM 700 PRIME™ Core Drill Motor
$6,499.00
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
The Husqvarna DM 700 is the most powerful electric drill motor in our range, designed for all-day use by professional drilling contractors. It is equipped with a maintenance-free, water-cooled 8 hp (6 kW) permanent magnet high-frequency motor delivering extremely high torque to handle large drilling dimensions and depths. The intelligent motor control software enables optimized rpms for a wide range of drilling diameters, from 3-24 in (80 to 600 mm).
| Specification | |
| Model | DM 700 |
| Part No. | 970449401 |
| Power 3-phase/1-phase, hp (kW) | 8 (5.9)/4 (2.9) |
| Voltage 3-phase/1-phase, V | 480/230 |
| Rated current, amp | - |
| Speeds | 18 (2 mechanical, 9 electric) |
| Spindle speed no load, rpm | 125/675 |
| Spindle speed loaded, rpm | 113/608 |
| Drill bit diameter with stand, max in (mm) | 24 (600) |
| Cooling | - |
| UNC water coupling | G-1.4" |
| Spindle thread, outer | 1-1/4-7" |
| Sound pressure level, dB(A) | 98 |
| Sound power level, dB(A) | 113 |
| Weight, lbs (kg) | 31 (14) |
| Recommended minimum size of generator, kW | - |
SINGLE CYLINDER REPAIR
If you have any questions about any products . Please email us at info@singlecylinderstore.com or call us at 877-558-1112.
| General | |
| Power source | Electric |
| Application | Commercial |
| Inventory | |
| Condition | New |
