Diamond Products 2600063 1.55 Danfoss Hydraulic Drill Motor w/out hose

California Proposition 65 Warning

WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Mounted Hydraulic Motors Danfoss Motors Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors include hydraulic hose connections.

Part Number	2600063
Cubic Inch	1.55
8 GPM	1232
12 GPM	1848
20 GPM	N/A
250GPM	N/A

Note: Picture is for reference only and may not reflect exact item

SINGLE CYLINDER REPAIR

If you have any questions about any products. Please email us at info@singlecylinderstore.com or call us at 877-558-1112

General
Application	Commercial
Inventory
Condition	New

Same Brand
Same Category

Diamond Products CC1000 Joint Cutting Saw

Call/Text 510-761-1112 for info

The Ultra Lightweight Saw That Cuts Decorative and Joint Cuts in Concrete.Features Power transference to blade drive via 2 molded notc..

$0.00

Diamond Products CC1000T 1-1/2 hp Super Duty Tile Saw, 5800572PKG

Extra Wide Tile Saw for Large Tile Cutting JobsFeatures 3-3/4” cutting depth 1-1/2 HP, 15amp, 115V high torque motor Rip cut up to..

$1,760.20

Diamond Products CC1111HUXL-14 Joint Cutting Mini Saw, 5801020

Features Heavy duty adjustable operator handles Easy to maneuver push drive Up-cut or down-cut available 1” arbor size with drive pi..

$3,910.72

Diamond Products CC1211HXL-14 Portable Saw, 14", Honda GX390, 5801093

Features Heavy duty design, but light weight enough for two people to lift Cyclone air filter (Honda® models) Easy to read built..

$3,780.20

Diamond Products CC125BXL-EE6 First-Cut Saw, Baldor Electric, 5801357,

Features Maximum cutting depth of 1-3/16” Reliable skid plate system for green concrete Heavy duty design but light weight enough for ..

$3,820.10

Diamond Products CC1300XL Electric Concrete Saw

Diamond Products CC1300XL Electric Concrete Saw

Call/Text 510-761-1112 for info

Diamond Products CC1300XL Gasoline Concrete SawDiamond Products CC1300XL Hydraulic Concrete Saw Saw Model # Blad..

$0.00

Diamond Products CC1300XL Gasoline Concrete Saw

Diamond Products CC1300XL Gasoline Concrete Saw

Call/Text 510-761-1112 for info

Diamond Products CC1300XL Electric Concrete SawDiamond Products CC1300XL Hydraulic Concrete Saw Saw Model # Blad..

$0.00

Diamond Products CC1313HYXL-20 20" Walk Behind Hydraulic Saw, Danfoss 25 GPM, 5800724C

Diamond Products CC1300XL Gasoline Concrete SawDiamond Products CC1300XL Electric Concrete Saw Saw Model # Blade..

$6,807.70

Diamond Products CC1507E3-20 Modular Saw, 5801500

For more information options please call us 18775581112Features Electric powered for areas with limited access and where exhaust ..

$9,840.10

Diamond Products CC1800XL Electric Medium Walk Behind Saw

Diamond Products CC1800XL Electric Medium Walk Behind Saw

Call/Text 510-761-1112 for info

Diamond Products CC1800XL Gas Medium Walk Behind SawDiamond Products CC1800XL Hydraulic Medium Walk Behind Saw Model # ..

$0.00

Diamond Products CC1800XL Gas Medium Walk Behind Saw

Diamond Products CC1800XL Gas Medium Walk Behind Saw

Call/Text 510-761-1112 for info

Diamond Products CC1800XL Electric Medium Walk Behind SawDiamond Products CC1800XL Hydraulic Medium Walk Behind Saw Model # ..

$0.00

Diamond Products CC1823BVXLP-14S 14” Propane Walk Behind Saw, 5801426

Features Briggs Vanguard engine converted to propane vapor draw Horizonally-mounted 20 lbs. propane tank Self-propelled travel for eas..

$11,750.20

Diamond Products CC190PRO-EE First-Cut Saw 5801128

For more information options please call us 18775581112Features Capable of .110” to .250” thick blades Self propelled drive Raise ..

$16,480.00

Diamond Products CC300M 2 HP-115 Volt 15 amp Electric Masonry Saw, 5800730

14" Blade Capacity.Features The most cost-efficient way to cut masonry Cuts 5” deep with 14” blade Powerful 2 HP electric motor ..

$1,490.00

Diamond Products CC500MXL2 Masonry Saw

Call/Text 510-761-1112 for info

This item is backordered until Jan-2023Versatile and PowerfulFeatures Stay level blade guard Removable cutting head Leg kit st..

$0.00

Diamond Products CC600T 3/4 HP Electric Tile Saw w/7" Blade Guard, 5800558PKG

Small, Portable Saw for General Tile Cutting7" Capacity (5/8" arbor)Features 1-3/4” maximum cutting depth Easy to clean water tr..

$820.00

Diamond Products CC800M Electric Block Saw

Call/Text 510-761-1112 for info

Diamond Products CC800M Gasoline Block SawRugged Block Saw For Large ApplicationsFeatures24” blade cuts a 10” block in a single pass ..

$0.00

Diamond Products CC800M Gasoline Block Saw

Pre-Order

Diamond Products CC800M Electric Block SawRugged Block Saw For Large ApplicationsFeatures24” blade cuts a 10” block in a single pass ..

$6,491.00

Diamond Products CC900TE 1-1/2 hp 10" Electric Economy Tile Saw, 5800559PKG

Large Tile Saw at an Economical CostFeatures 3-3/4” cutting depth 1-1/2 HP, 15amp, 115V high torque motor Rip cut up to 20”, diago..

$1,502.20

Diamond Products CC912TS Electric Tile Saw with 9" Blade Capacity, 5801608PKG

Light-weight and compact for high performance cutting.9" blade capacity with 1" arbor.Features Heavy duty table with measuring gui..

$616.00

Diamond Products CCE0911H-20 Portable Saw, Honda GX390, 20”, 5801613

FeaturesHeavy duty design, but light-weight enough for two people to lift Cyclone air filter Easy to read built-in depth indicator Precis..

$3,210.10

Diamond Products CP305 Handheld Polisher, 5801328

Features Uses three 5” diamond polishing pads and/or diamond grinding discs Planetary, gear driven system Powered by a heavy duty ..

$4,172.00

Diamond Products CPG102E1 Single Head Floor Grinder Baldor® 2 HP-1PH, 115V or 230V, 5800727

Features Remote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handle..

$4,490.00

Diamond Products CPG110H Single Head Floor Grinder Honda® GXV390, 5800726

FeaturesRemote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handles Adjust..

$5,024.00

Diamond Products CPG175E1 Single Head Floor Grinder Baldor® 7.5 HP-1PH, 230V, 5800828

Features Remote throttle 2” dust port opening Single grease point Steel box frame Adjustable operator handles Lifting handle..

$6,450.00

Chicago Pneumatic COR 15* Core Drill 1500 RPM (1806101455)

-32 %

CP hydraulic core drills are ideal for working in confined areas - installing drainage, swer and water pipes, or cable and ventilation ducts where lar..

$3,299.00 $4,859.00

Chicago Pneumatic COR 5* Core Drill 500 RPM (1806101454)

-32 %

CP hydraulic core drills are ideal for working in confined areas - installing drainage, sewer and water pipes, or cable and ventilation ducts where la..

$3,299.00 $4,859.00

Diamond Products 2600016 Vacuum Pump 115v-60hz W/ On And Off Switch

Genuine OEM Diamond ProductsDiamond Products 2600016 Vacuum Pump 115v-60hz W/ On And Off SwitchFit model: M-1, M-2, M-4, M-5, M-5Pro..

$505.00

Diamond Products 2600030 32.0 Cubic Inch White Hydraulic Drill Motor w/out hose

Mounted Hydraulic Motors White Motors Mounted into a pillow block with spindle. The core bit is then attached to the spind..

$1,636.00

Diamond Products 2600035 4.9 Cubic Inch Char-Lynn Hydraulic Drill Motor w/out hose

.Mounted Hydraulic Char-Lynn Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors ..

$1,181.00

Diamond Products 2600036 6.2 Cubic Inch Char-Lynn Hydraulic Drill Motor w/out hose

.Mounted Hydraulic Char-Lynn Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors ..

$1,168.00

Diamond Products 2600037 8.0 Cubic Inch Char-Lynn Hydraulic Drill Motor w/out hose

.Mounted Hydraulic Char-Lynn Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors ..

$1,315.00

Diamond Products 2600038 9.6 Cubic Inch Char-Lynn Hydraulic Drill Motor w/out hose

.Mounted Hydraulic Char-Lynn Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors ..

$1,218.00

Diamond Products 2600039 11.9 Cubic Inch Char-Lynn Hydraulic Drill Motor w/out hose

.Mounted Hydraulic Char-Lynn Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors ..

$1,197.00

Diamond Products 2600040 14.9 Cubic Inch Char-Lynn Hydraulic Drill Motor w/out hose

.Mounted Hydraulic Char-Lynn Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors ..

$1,215.00

Diamond Products 2600041 18.7 Cubic Inch Char-Lynn Hydraulic Drill Motor w/out hose

.Mounted Hydraulic Char-Lynn Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors ..

$1,256.00

Diamond Products 2600061 .77 Danfoss Hydraulic Drill Motor w/out hose

Mounted Hydraulic Motors Danfoss Motors Mounted into a pillow block with spindle. The core bit is then attached to the spindle for dril..

$1,380.00

Diamond Products 2600064 1.94 Danfoss Hydraulic Drill Motor w/out hose

Mounted Hydraulic Motors Danfoss Motors Mounted into a pillow block with spindle. The core bit is then attached to the spindle for dril..

$2,811.00

Diamond Products 2600071 24.0 Cubic Inch Char-Lynn Hydraulic Drill Motor w/out hose

.Mounted Hydraulic Char-Lynn Mounted into a pillow block with spindle. The core bit is then attached to the spindle for drilling. Motors ..

$1,470.00

Diamond Products 2600072 45.6 Cubic Inch White Hydraulic Drill Motor w/out hose

Mounted Hydraulic Motors White Motors Mounted into a pillow block with spindle. The core bit is then attached to the spind..

$1,710.00

Diamond Products 4220048 M1AA-12 Portable Core Complete rig w/ vacuum pump, 12amp 220v

Features Weighs only 35 lbs. Single speed-800 RPM Spring loaded slide handle for easy coring Convenient carrying handle on carriage ..

$2,790.00

Diamond Products 4220049 M1AA-12 Portable Core Rig w/ Anchor Base, 12 amp, 220V

Features Weighs only 35 lbs. Single speed-800 RPM Spring loaded slide handle for easy coring Convenient carrying handle on carriage ..

$1,620.00

Diamond Products 4220050 M1AA-15 Portable Core Rig w/ Anchor Base, 15amp 110v

Features Weighs only 35 lbs. Single speed-800 RPM Spring loaded slide handle for easy coring Convenient carrying handle on carriage ..

$1,420.00

Diamond Products 4220058 M1AA-15 Portable Core Complete rig w/ vacuum pump, 15amp 110v

Features Weighs only 35 lbs. Single speed-800 RPM Spring loaded slide handle for easy coring Convenient carrying handle on carriage ..

$2,735.00

Diamond Products 4220094 M-5 Pro Heavy Duty Drill Rig, CB744 Motor, W/out Control Panel

Features & Benefits:Quick disconnect motor mount that makes it easy to remove the motor 4-spoke handle (can be used on right or left) on ..

$4,668.00

Diamond Products 4220097 M-5 Pro Heavy Duty Drill Rig, CB733 Motor, W/out Control Panel

Picture is for reference only: M-1 vs CB733Features & BenefitsQuick disconnect motor mount that makes it easy to remove the motor ..

$4,285.00

Diamond Products 4244014 WEKA DK22S Drill Motor, 110V

Features Heavy duty Water connection 1.250”-7 threaded spindle Recommended for bits up 1”-12” Max 16”Specifications..

$3,239.00

Diamond Products 4244016 WEKA DK22 Drill Motor, 230V

Features Heavy duty Water connection 1.250”-7 threaded spindle Recommended for bits up 1”-12” Max 16”Specifications..

$3,149.00

Diamond Products 4244018 WEKA DK22 Drill Motor, 110V

Features Heavy duty Water connection 1.250”-7 threaded spindle Recommended for bits up 1”-12” Max 16”Specifications..

$3,149.00

Diamond Products 4244022 WEKA DK42 Drill Motor, 460V

FeaturesHeavy duty Water connection 1.250”-7 threaded spindle Recommended for bits 3”-18” Max 20”Specifications ..

$3,916.00