Pre-Order
Multiquip LS300G Hydraulic Concrete Pump Mayco Zenith 428 Gas Eng
$76,100.00
Available Options
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Features
- Concrete piston face pressure of 800 PSI (55 Bar)
- Concrete cylinder diameter is 6 inches (152 mm) with 24-inch stroke (609 mm)
- Powered by a 71.2 (53 kW) Zenith gasoline engine naturally aspirated
- Designed for aggregate sized up to 1-1/2 inches (38 mm)
- True Reverse allows stroke change during any point in the pumping cycle
- Hard faced wear components for longer life
- Variable volume output (from the control panel) from 0-to-30 cubic yards (22.9 cubic meters) per hour
- Ideal for use with shotcrete, masonry block fill, slabs, footings, basements, & compaction grouting
- Innovative DCP (Digital Control Panel) solid state electronic control box with full diagnostic & performance monitoring
- Optional wireless radio remote has a range of 500 feet (153 meters)
- Optional rear hydraulic outriggers
- Optional air or electric vibrators for hopper screen
Specifications | |
Unit Specifications | |
Hopper Height | 43 in |
Hopper Capacity | 10 ft |
Pump Outlet | 5.0 in |
Concrete Cylinders | 6x24 in |
Hydraulic Cylinders | 3x24 in |
Hydraulic Oil Capacity | 33 gal |
Fuel Tank Capacity | 16 gal |
Brake Type | Hydraulic Surge |
Pumping Specifications | |
Pumping Rate per Hour | 0-30 yd |
Max. Concrete Pressure | 800 psi |
Max. Aggregate Size | 1.5 in |
Dimensions & Weights | |
Overall Length | 155 in |
Overall Width | 67.0 in |
Overall Height | 54.0 in |
Operating Weight | 3855 lb |
| General | |
| Power source | Gas |
| Application | Commercial |
| Inventory | |
| Condition | New |
