Pre-Order
Multiquip MLT Light Tower
$7,125.00
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
The base unit for the MLT-series light towers. Offered without a power source for contractors who already own a Multiquip DA7000 generator or SDW225SS welder. It can also be used to provide lighting for indoor applications by connecting directly to an alternate power source.
- Can be used with a Multiquip DA7000SS generator or SDW225SS welder
- Withstands winds up to 72 mph (115 kph) with, and 55 mph (88 kph) without, an approved generator
- Ballasts and light switches are protected by inside a waterproof box
- Mast extends to 30 feet (9 meters) and can be rotated 360 degrees
- Four 1,000-watt metal halide floodlights illuminates an area of 5 to 7 acres (3.2 hectares)
Sound Level @ 23ft 0 dBA Fuel Tank Capacity 0 gal 0 L Ground Clearance 6.5 in 165 cm Standard Hitch Type 29228 — 2" Ball Adjustable Optional Hitch Types 29369 — 3" Pintle Floodlights 4 — 1000 watt Metal Halide Light Coverage 5 to 7 acres acres 2 to 2.8 hectares hectares Lumens 440,000 Lamp Termination 4 x 3-pin QD Plug Max. Tower Height 32 ft 9.75 m Tower Support Points 4 Wind Stability
w/ Genset72 mph 116 kph Wind Stability
w/o Genset45 mph 72 kph Winch Capacity 1,500 lb 680.4 kg Winch Wire Size 3/16 in Max. Generator Output W Cont. Generator Output W Voltage V Amperage A Receptacles Max. Amperage A Current Range W Voltage Range V Duty Cycle @ 200A
| General | |
| Application | Commercial |
| Inventory | |
| Condition | New |
